DJI Pilot 2 flight plan: send the mission without a cable
At the office, you draw the field on the map and Waypoint360 generates the route that covers it. In the field, the route is waiting in the DJI Pilot 2 library: no cable, no SD card, no file to copy.
Get started. Create an account, no commitment →
What you need
- A compatible DJI professional drone (list below) and its remote controller with DJI Pilot 2.
- A remote controller connected to the internet (mobile network or Wi-Fi hotspot).
- A Waypoint360 drone pilot account, and the remote controller connected to Waypoint360 in DJI Pilot 2.
Sending to the remote controller is in Beta: it is opening gradually, and its limits are listed below.
1. Draw the area on the map
At the office, open Flight route. Click on the map to place the corners of the field to cover (a solar farm, for example), then drag a corner to adjust it.
2. Generate the route
Set the height above ground, the line spacing, the speed and the gimbal pitch, then click Generate route. Waypoint360 calculates a back-and-forth route, line after line, that covers the whole area.
3. Check every point before the flight
In France, every waypoint is compared with the official IGN and SIA airspace zones. A point in a prohibited zone or above the authorised ceiling is flagged: adjust the area or the height before you leave. Waypoint360 shows you what it finds, it does not certify that the flight complies.
4. Save it and attach it to the intervention
Save the route, and attach it to the intervention it prepares. You then find it with the rest of the mission, in the mission workflow.
5. Make the mission available on the remote controller
Turn on Available on the remote controller. Only the missions you make available go to the field: the remote controller library stays readable, and the office decides what the pilot receives.
6. Open the route in DJI Pilot 2
In the field, in DJI Pilot 2 connected to Waypoint360, open the route library: the mission appears among the cloud routes. Preview it, download it to the remote controller, then fly it.
You can edit the route on site, once you have downloaded it. These changes stay on the remote controller: they do not come back to Waypoint360 yet. To change the reference mission, edit it in Waypoint360.
7. The flight comes back to the intervention
Once the drone has landed, the flight comes back through the Waypoint360 gateway and is attached to the intervention. You have nothing to import by hand.
The .kmz file, still available
The Download WPML (.kmz) button stays where it is. Import the file into DJI Pilot 2 like any route file: this is the way to go if your drone is not yet supported by direct sending.
Compatible drones
Direct sending targets DJI professional drones flown with DJI Pilot 2 whose code is known:
- Matrice 4TD and Matrice 4D
- Matrice 4T and Matrice 4E
- Matrice 30 and Matrice 30T
- Mavic 3 Enterprise series
- Matrice 3D and Matrice 3TD
- Matrice 350 RTK
- Matrice 300 RTK
Consumer drones flown with DJI Fly are not compatible: Waypoint360 routes follow the format of DJI professional drones (WPML).
What the Beta does not do yet
- Sending to the remote controller has not yet been verified end to end on hardware.
- It is opening gradually: if it is not active on your account yet, the .kmz file remains available.
- The remote controller must be connected to the internet to receive the route.
Frequently asked questions
Which drones are compatible?
DJI professional drones flown with DJI Pilot 2 whose code is known: Matrice 4TD, 4D, 4T and 4E, Matrice 30 and 30T, Mavic 3 Enterprise series, Matrice 3D and 3TD, Matrice 350 RTK and Matrice 300 RTK. Consumer drones flown with DJI Fly are not compatible.
Do I need a cable or an SD card?
No. The remote controller, connected to the internet and to Waypoint360 in DJI Pilot 2, finds the route in its library. If you prefer, the .kmz file can still be downloaded and imported into DJI Pilot 2 as a file.
How are airspace zones checked?
In France, every waypoint of the route is compared with the official IGN and SIA zones before the flight. A point in a prohibited zone or above the authorised ceiling is flagged, so that you can adjust the area or the height. Waypoint360 flags, it does not certify: the decision to fly remains yours.
Can I edit the route in DJI Pilot 2?
Yes, on the remote controller, once you have downloaded it. These changes stay on the remote controller: they do not come back to Waypoint360 yet. To change the reference mission, edit it in Waypoint360.
Why is this feature in Beta?
It is opening gradually, and sending to the remote controller has not yet been verified end to end on hardware. Downloading the .kmz file remains available in the meantime.