surveillance

Matrice 5T

DJI Matrice 5T: 1280×1024 thermal, 176× zoom, LiDAR, 59 min, C2/C6 classes. Specs, use cases and regulations.

DJI
Quote-based, through a DJI Enterprise dealer

DJI Matrice 5T: high-definition thermal imaging in a foldable drone

The DJI Matrice 5T was released on 5 November 2026. It succeeds the Matrice 4T in the same segment: a foldable drone designed for observation, security and inspection.

Its main selling point comes down to one figure: a 1280×1024 pixel thermal camera, four times as many pixels as the 640×512 of the Matrice 4T. It adds a 176× hybrid zoom, a laser rangefinder extended to 3,000 m and obstacle sensing that combines rotating LiDAR and radar.

Finally, it carries two European class identification labels, C2 and C6. The first opens subcategory A2 of the open category, the second the standard scenario STS-02, beyond the visual line of sight of the remote pilot.

What changes compared with the Matrice 4T

Matrice 4TMatrice 5T
Thermal camera640×5121280×1024 (2560×2048 in UHR)
Hybrid zoom112×176×
Visible cameras3 × 48 MP3 × 50 MP
Telephoto168 mm equivalent252 mm equivalent
Flight timeabout 49 minup to 59 min
Takeoff weightabout 1.2 kg2.239 kg

The extra capability comes at the cost of weight: the Matrice 5T weighs almost one kilogram more. It remains foldable: 335 × 155 × 203 mm when folded.

Technical specifications

1280×1024 thermal camera

The uncooled VOx sensor delivers a native resolution of 1280×1024 pixels, with an 8 µm pixel pitch and a 30 Hz frame rate. UHR (ultra-high resolution) mode raises the image to 2560×2048. The lens has an f/0.85 aperture, a 45° field of view and digital zoom up to 32×.

At the same distance, doubling the resolution in each direction lets you make out a silhouette, a hot spot or a faulty photovoltaic cell from further away. This is the criterion that matters in search for missing persons, where every metre gained widens the area covered per flight.

Three 50 MP visible cameras

  • Wide-angle: 1/0.98-inch sensor, 23.5 mm equivalent, f/1.8, for the overall view
  • Medium telephoto: 1/1.28-inch sensor, 70 mm equivalent, f/2.88, for identification at medium range
  • Telephoto: 1/1.5-inch sensor, 252 mm equivalent, f/2.8, the basis of the 176× hybrid zoom

Video goes up to 4K at 30 frames per second.

3,000 m laser rangefinder

The rangefinder measures up to 3,000 m (1,200 m at an oblique angle), with a one-metre blind zone. It is a Class 1 laser, safe for the eyes. It is used to locate an observed target precisely, to guide a ground team or to document a finding.

Obstacle sensing

The Matrice 5T combines three technologies:

  • binocular vision on all sides;
  • a horizontal rotating LiDAR, covering the front, rear and sides;
  • a millimetre-wave radar at the front, top and bottom, supplemented by a downward-facing infrared time-of-flight sensor.

Radar and LiDAR do not depend on light: they keep detection active at night and in low visibility, where vision alone falls short. Obstacle avoidance remains effective up to 21 m/s horizontally.

Flight platform

Up to 59 minutes of flight time (54 minutes hovering), 83 km/h in Sport mode, IP55 protection and an operating range of -20 °C to 50 °C. Transmission reaches up to 20 km under the CE standard.

Professional use cases

Search for missing persons and rescue

The 1280×1024 thermal camera detects a human presence from further away and from higher up, covering a wider area on each flight. The rangefinder gives the target's position to ground teams. Endurance of nearly one hour limits battery changes during a search.

Surveillance and security

The 176× zoom makes it possible to observe from a distance, out of earshot. Thermal imaging supports night patrols around industrial sites, construction sites and outdoor events.

Infrastructure inspection

The 252 mm telephoto lens inspects a pylon, a bridge deck or a power line from a safe distance, without interrupting operations. Thermal imaging detects overheating on electrical installations.

Thermal audit

Rooftops, district heating networks and solar farms: the 1280×1024 resolution reduces the number of passes needed to cover the same surface at the same level of detail.

Regulations: what the C2 and C6 classes allow

According to the DJI Enterprise FAQ, the Matrice 5T holds EASA C2 and C6 certifications. These two labels open two different frameworks.

C2: the open category, subcategory A2

With the C2 class, the Matrice 5T can fly in the open category, subcategory A2, within visual line of sight, without an operational declaration:

  • direct remote identification and geo-awareness active and up to date;
  • no flying over uninvolved persons;
  • at least 30 m horizontally from those persons, a distance that can be reduced to 5 m in low-speed mode, after assessing the weather, the performance of the aircraft and the segregation of the overflown area.

The remote pilot must hold the A2 certificate of competency. It is obtained after the A1/A3 online exam, a self-practical training and an additional exam of at least 30 questions, passed with 75 %.

C6: the standard scenario STS-02

With the C6 class, the Matrice 5T can fly in the specific category, under standard scenario STS-02: beyond the visual line of sight of the remote pilot, over a controlled ground area, in a sparsely populated environment. STS-02 is subject to a declaration, not an authorisation. Its main conditions:

  • a controlled ground area located entirely in a sparsely populated environment;
  • flight visibility of more than 5 km;
  • the aircraft within the remote pilot's visual line of sight at takeoff and landing;
  • without an observer: no more than 1 km from the remote pilot, on a pre-programmed trajectory out of sight;
  • with airspace observers: no more than 2 km from the remote pilot and 1 km from the nearest observer;
  • no more than 120 m above the surface;
  • no carriage of dangerous goods.

⚠️ The A2 certificate is not enough for STS-02. The remote pilot must hold the STS theoretical knowledge certificate and an STS-02 practical skills training accreditation. A holder of the A2 certificate takes a shorter theoretical exam, with 30 questions instead of 40.

The operator must also write an operations manual. It is not attached to the declaration, but must be kept available to the authority.

Declaration and documents

  • The STS declaration is submitted to the national aviation authority of the State where the operator is registered, without any authorisation being required.
  • It is valid for two years.
  • For an STS-02 flight, the aircraft must be accompanied by its C6 class EU declaration of conformity.

Standard scenario STS-01 (within visual line of sight, in a populated area) requires the C5 class. According to DJI, this calls for a dedicated C5 kit: the standard Matrice 5T does not have one.

Plan your missions with Waypoint360

Waypoint360 supports professional remote pilots and public services in preparing their flights: operations manuals, SORA assessments, tracking of exchanges with the authority and flight logbooks. The platform also lists operators specialised in surveillance, security and inspection, filtered by geographical area and mission type.


Data sheet compiled from the DJI Enterprise technical specifications and FAQ, consulted on 14 November 2026. Specifications to be confirmed with DJI Enterprise.